Volvo 200 Series

src: ranwhenparkeddotnet.files.wordpress.com

The Volvo 200 series was a range of mid-size cars produced by Volvo Cars from 1974 to 1993, with more than 2.8 million units sold worldwide. Like the Volvo 140, it was designed by Jan Wilsgaard. It overlapped production of the Volvo 700 series introduced in 1982. As the 240 remained popular, only the 260 was displaced by the 700 series -- which Volvo marketed alongside the 240 for another decade. The 700 series was replaced a year before the 240 was discontinued. Production of the 240 ended on 14 May 1993 after nearly 20 years.

Video Volvo 200 Series

History

The Volvo 240 and 260 series was introduced in the autumn of 1974, and was initially available as six variations of the 240 Series (242L, 242DL, 242GT, 244DL, 244GL, 245L and 245DL) and two variations of the 260 Series (264DL and 264GL). The 240 Series was available in sedan (with two or four doors) or station wagon, however the 260 Series was available as a coupé (262C Bertone), four-door sedan, or station wagon. The 200 looked much like the earlier 140 and 164 Series, for they shared the same body shell and were largely the same from the cowl rearward. However, the 200 incorporated many of the features and design elements tried in the Volvo VESC ESV in 1972, which was a prototype experiment in car safety. The overall safety of the driver and passengers in the event of a crash was greatly improved with very large front and rear end crumple zones. Another main change was to the engines, which were now of an overhead-cam design. The 260 series also received a V6 engine in lieu of the 164's inline-six.

The 200 Series had MacPherson strut type front suspension, which increased room around the engine bay, while the rear suspension was a modified version of that fitted to the 140 Series. The steering was greatly improved with the installation of rack-and-pinion steering, with power steering fitted as standard to the 244GL, 264DL and 264GL, and there were some modifications made to the braking system (in particular the master cylinder).

The front end of the car was also completely restyled - that being the most obvious change which made the 200 Series distinguishable from the earlier 140 and 160 Series. Other than all the changes mentioned above, the 200 Series was almost identical to the 140 and 160 Series from the bulkhead to the very rear end. In 1978, a facelift meant a redesigned rear end for sedans, with wraparound taillights and a trunk opening with a lower lip. The dashboard was derived from the safety fascia introduced for the 1973 140-series - but was changed again for the 1981 model year with the instrument pod made considerably larger and the radio repositioned near the top of the dashboard. All models were available with a choice of four-speed manual or a three-speed automatic transmission. Overdrive was also optional on the manual 244GL, while a five-speed manual gearbox was optional on the 264GL and 265GL.

In the autumn of 1975 (for the 1976 model year in America), the 265 DL estate became available alongside the existing range, and this was the first production Volvo estate to be powered by a six-cylinder engine. The choice of gearbox was also greatly improved, with overdrive now available as an option in all manual models except the base-model 242L and 245L. As before, the 3-speed automatic was optional in every model. The B21A engine gained three horsepower; a new steering wheel and gearknob were also introduced.

At the 1976 Paris Motor Show Bertone first showed the stretched 264 TE, a seven-seater limousine on a 3,430 mm (135 in) wheelbase, although it had entered production earlier. The raw bodies were sent from Sweden to Grugliasco for lengthening, reinforcing, and finishing. Carl XVI Gustav of Sweden used one, as did much of East Germany's political leadership.

For 1977 the B19A engine with 90 PS (66 kW) replaced the old B20A in most markets, although it soldiered on for another two years in some places. This is also when the sportier 242 GT arrived.

In 1978 the grille was altered, now with a chrome surround. Rear view mirrors were now black, while the front seats were changed as were the emblems, while interval wipers were introduced. 1978s were also the first 240s to receive new paint, unlike the earlier model years which rusted very badly.

1979 brought a full facelift front and rear. The GLE was added while the L was cancelled, and the six-cylinder diesel arrived late in the year. For 1980, the sporty GLT arrived, replacing the GT. For 1981 there was yet another new grille, while the station wagons received new, wraparound taillights. The B21A gained some four horsepower, now 106 PS (78 kW), while the carburetted B23A with 112 PS (82 kW) was introduced in some markets. The Turbo arrived, while six-cylinder models now had a more powerful 2.8-liter engine.

Incremental improvements were made almost every year of the production run. One of the major improvements was the introduction of the oxygen sensor in North America in late 1976 (1977 models), which Volvo called Lambda Sond and developed in conjunction with Bosch. It added a feedback loop to the K-Jetronic fuel injection system already in use, which allowed fine-tuning of the air and fuel mixture and therefore produced superior emissions, drivability and fuel economy.

For the 1983 model year, Volvo dropped the DL and GL labels, selling the cars simply as 240s. Buyers protested and the grades returned for 1984. A new manual gearbox also arrived for 1984, while a four-speed automatic option was available in the GL. GLT and Turbo versions received a taller grille.

About one-third of all 240s sold were station wagons, which featured very large cargo space of 41 cubic feet (1.2 m³). They could be outfitted with a rear-facing foldable jumpseat in the passenger area, making the wagon a seven-passenger vehicle. The jumpseat came with three-point seat belts, and wagons were designed to have a reinforced floor section, protecting the occupants of the jumpseat in the event of a rear-end collision.

The last 200 produced was a blue station wagon built to the Italian specification and named the "Polar Italia", currently displayed at the Volvo World Museum.

Maps Volvo 200 Series

Engines

The 200 series was offered with three families of engines. Most 240s were equipped with Volvo's own red block, 2.0-2.3 litre four-cylinder engines. Both overhead valve and overhead cam versions of the red block engines were installed in 240s. The B20 was used only in the early years and subsequently replaced by the B19, a smaller version of the B21. Power of the carburetted versions increased for the 1979 model year. V6 engines were also available, first in the 260-models, but also later in the GLE- and GLT-versions of 240. Known as the PRV family, they were developed in a three-way partnership among Volvo, Peugeot and Renault, 240 diesel models are powered by diesel engines purchased from Volkswagen. In Greece and Israel the 1.8 liter B17 engine was available beginning with the 1980 model year (also as a luxuriously equipped 260). This hard working little twin-carb engine developed 90 PS (66 kW), and had considerably higher fuel consumption than even the turbocharged top version.

The 1974 240 series retained the B20A inline-four engine from the 140 Series in certain markets, with the new B21A engine available as an option on the 240 DL models. The new B21 engine was a 2127 cc, four-cylinder unit, which had a cast-iron block, a five-bearing crankshaft, and a belt-driven overhead camshaft. This engine produced 97 PS (71 kW) for the B21A carburettor 242DL, 244DL and 245DL, and 123 PS (90 kW) for the B21E fuel-injected 244GL.

North American inline-fours

The first models to reach the US market were 1975 models equipped with the old pushrod B20F engine, with the new OHC B21F motor making its way to America for the 1976 model year. The US and Canadian 200-series ranges were not identical; the B21A carbureted engine was never available in the US, but was the base engine in Canada from 1977 through 1984. All 240s were fuel-injected in the US market; the carbureted B20 and B21 engines were not available due to emissions regulations. 1975-76 Canadian models were identical to their US counterparts. From 1979, a North American 240 with the fuel injected B21F produces 107 hp (80 kW) at 5250 rpm. Beginning in 1985, Canadian models received the US model engines, usually in 49-state form, except for the Turbo, which only had California emission controls.

Six-cylinder PRV

The 260 models had a completely new 90-degree V6 B27E engine, sometimes called the "Douvrin". This engine was developed jointly by Peugeot, Renault and Volvo in collaboration, and is therefore generally known as the "PRV engine". This engine was unusual at the time, being composed of many small parts in a modular design (as opposed to a monolithic engine block and head). The B27E engine has a displacement of 2,664 cc, an aluminium alloy block, and wet cylinder liners. This engine produces 140 bhp (100 kW) for both the 264DL and 264GL. In fuel-injected form, the B27F was introduced to the US in the 1976 260 series. The two-door 262 DL and GL sedans, the 264DL saloon (sedan) and the new 265DL estate (station wagon) were offered outside North America with the B27A engine. Almost identical to the fuel-injected V6 B27E engine, it has an SU carburettor instead of fuel injection, and therefore it produces a lower output of 125 PS (92 kW).

Volvo increased engine displacement to 2.8 litres in 1980 with the introduction of the B28E and B28F, which were prone to top-end oiling troubles and premature camshaft wear. Some export markets also received the lower output carburetted B28A engine with 129 PS (95 kW) at 5,250 rpm, capable of running on lower-octane fuel. Nevertheless, Volvo continued to use the B28 V6 in their new 760 model. DeLorean Motor Company went on to use the PRV B28F in their DMC-12 vehicle, and a three-litre version was used in the 1987-1992 Eagle Premier, Dodge Monaco, and Renault 25. The updated B280 engine used in the final years of the 760 and 780 models did not suffer from the same premature camshaft wear as the earlier PRV engines. In North America, the 260 series was only available with a three-speed automatic transmission and the engine produces 130 hp (97 kW).

VW diesels

Announced at the 1978 Paris Auto Show, the Volvo 240 GL D6 was introduced in the spring of 1979. Volvo's new diesel engine was purchased from Volkswagen and was a six-cylinder iteration of the ones installed in diesel Volkswagen and Audi vehicles at the time. Production was initially low, with only around 600 built by the time of the introduction of the 1980 model year cars. These engines are all liquid-cooled, pre-combustion chamber, diesel engines with non-sleeved iron blocks and aluminum heads. A Bosch mechanical injection system is used that requires constant electrical input so that the fuel supply can be cut off when the ignition key is removed. A 2.4-litre inline-six (the D24) and a 2.0-litre inline-five (the D20) were available, producing 82 PS (60 kW) and 69 PS (51 kW) respectively. The lesser D20 engine was only sold in select markets where it was favoured by the tax structures, most cars went to Finland but it was also marketed in Italy between 1979 and 1981. A turbocharged diesel was never sold in the 200 series. At the time of introduction, the Volvo was one of the fastest as well as quietest diesels sold.

The diesel had originally been intended to be sold North America first and foremost, but in actuality the D24 only became available in the North American market beginning with the 1980 model year. After the US diesel market collapsed, sales decreased to ever smaller numbers and it was discontinued after the 1985 model year. No diesels were actually delivered during 1980 as Volvo had a hard time meeting the EPA's environmental standards. The federalized diesel developed a claimed 78 hp (58 kW; 79 PS), but was not certified for sale in California.

src: carphotos.cardomain.com

Badges

Nomenclature

The 200-series cars were identified initially by badges on their trunk lid or rear hatch in a manner similar to the system used for previous models.

• 1974-1982: three digits (in the format 2XY, where X usually represented the number of cylinders and Y represented the doors: 2 for coupés, 4 for sedans, 5 for station wagons) followed by trim level letters. For example; 244 and 245 were 4-cylinder sedans and wagons respectively and 264 and 265 (V6) cylinder sedans and wagons respectively.
• 1983-1993: 240 (or 260 until 1985) followed by trim level letters (third digit no longer reflected body style, although it is reflected in the engine compartment label, as well as on the label in the trunk on sedans or under the main cargo compartment storage lid on wagons). Special models (e.g. Polar and Torslanda) sometimes omitted the "240".

For the American market:

• 1975-1979: trim level letters preceded by three digits (in the format 2XY, where X usually represented the number of cylinders and Y represented the doors: 2 for coupés (only for the 262C. 242 are two-door sedans), 4 for sedans, 5 for station wagons)
• 1980-1985: trim level letters. Note: A small number of 4-cylinder 260s were produced, namely the 1980-1981 GL sedan, which could either be a 240 or a 260. Additionally, diesel 240s have six-cylinder engines.
• 1986-1993: 240 followed by trim level letters (third digit no longer reflected body style), although it is reflected in the engine compartment label, as well as on the label in the trunk on sedans or under the main cargo compartment storage lid on wagons.

Trim levels

Throughout the 200-series' production, different levels of luxury were available for purchase. The specific trim level designations ranged from L, being the least expensive, to GLT, indicating a sporty premium offering. The actual equipment and availability of a particular trim level varied depending on the market. The letters normally appeared on the trunk lid or rear hatch of the car (except for during MY1983) and had originally represented the following, although by the 1980s the letter codes had officially lost any underlying meaning:

• L (Luxe)
• DL (de Luxe)
• GL (Grand Luxe)
• GLE (Grand Luxe Executive)
• GLT (Grand Luxe Touring)
• GT
• Turbo (Replaced the GT offering in 1981, with GLT trim)

(For example, a 1979 GT 200-series Volvo would be badged a 242 GT, meaning it is a 240-series car with two doors, and GT trim.)

The '4' and '6' codes soon lost their original meaning as signifying the number of cylinders with the introduction of B17-engined four-cylinder Volvo 260s for export to Greece and Israel in the late 70s. There was also a six-cylinder 240 GLT in some markets, as well as both six- and five-cylinder diesels labelled '240'. The second digit now only denoted how luxurious the car was. By June 1982, with the introduction of the model year 1983 Volvos, the third digit too lost its meaning and the 242/244/245 became simply the 240.

Special trim levels

Several trim levels were special offerings only available during certain years or for unique body styles:

• GTX - this was not an actual trim level, but the name of a sporty parts package available from Volvo dealers in much of Scandinavia
• Polar: Austerily equipped entry level version on some European markets - such as Italy (1991), Belgium and the Netherlands (1992-1993). Italian spec. always, BeNeLux spec. very often with B200F engine (instead of B230F). Cloth interior instead of tricot plush on "GL"-badged vehicles.
• Super Polar: Well equipped version with black leather upholstery, four power windows and AC, aluminium wheels with crossed spokes. Three different metallic paintings to choose, all black trim instead of chrome. Only Italy 1992-1993, only engine B200F.
• SE: Special Equipment; late runout edition on certain markets in 1991-1993. Typically with GL or GLT interior trim but without the performance/ handling modifications. Only 1991 in the United States.
• Limited (1993; very similar to Classic, but not numbered edition with brass plaque instead of the numbering)
• Classic (1993; numbered version of the last 1600 200-series Volvos produced for North American market)
• Torslanda 1992-93 Europe-only version, usually to be found in Britain. Simply equipped, three body paintings to choose. Estates only.

Engine type

Sometimes, the engine type of a car was also designated by badging. In some instances, these badges were omitted, replaced trim level badges, or even used in combination with them:

• Turbo (was its own trim level - 1981-83 models also had GLT Turbo models)
• Diesel (like the Turbo, was its own trim level - had most GL features, but some omissions)
• Injection (Indicating fuel injection (K-Jetronic) in certain markets)
• Katalysator (Indicating a catalytic converter in Scandinavia and the German market)

src: hanabi.autoweek.com

200 Series specifications

• Produced 1974-1993
• Production volume: 2,862,053
• Body style: 4-door sedan (1974-1993), 2-door sedan (1974-1984), 5-door station wagon (1974-1993), 3-door ambulance, 3-door hearse, 3-door racecar
• Engines: See the engine section for more detail. Engine configurations included:
  • B20 four-cylinder inline OHV
  • B17, B19, B21, B23, B200, B230 four-cylinder inline OHC
  • B19ET, B21ET, B21FT four-cylinder inline OHC turbo (intercooled with factory installed IBS - Intercooler Boost System kit or Volvo R-Sport dealer retrofitting kit for 1981-83 models starting in mid-1983.)
  • B27, B28 V6 OHC
  • D20 five-cylinder inline OHC diesel
  • D24 six-cylinder inline OHC diesel
• Transmissions: Volvo offered various transmissions depending on the year/model/market/engine combinations including the:
  • M40 (4-speed manual, 1975 only)
  • M41 (4-speed manual with electrical overdrive, 1975 only, coupe and sedan only)
  • M45 (4-speed manual)
  • M46 (4-speed manual with electrical overdrive)
  • M47 (5-speed manual)
  • BW35, BW55 or AW55 (3-speed automatic)
  • AW70 or AW71 (4-speed automatic with 3 direct + OD)
• Brakes: Hydraulic, disc brakes on all four wheels.
  • Front: four opposed piston calipers with either solid or (later) vented rotors
  • Rear: twin piston calipers utilizing solid rotors and integral parking brake drums.
  • Triangulated braking circuits on non-ABS cars with both front calipers and one rear caliper per circuit. ABS cars used normal diagonal split braking system.
• Standard safety features
  • Driver airbag (from 1990 - US only; optional 1990-91 Cdn models, standard 1992-1993 Cdn)
  • Anti-lock braking system (ABS) (optional 1991-1992, standard 1993 in USA)
• Dimensions:
  • Wheelbase: 264 cm (103.9 in)
  • Length (Europe):
    • 1975-1980: 490 cm (192.9 in)
    • 1981-1993: 479 cm (188.6 in)
  • Length (US/Canada):
    • 1975-1982: 490 cm (192.9 in) - 1975-1985 Cdn 240)
    • 1983-1985 US: 479 cm (188.6 in)
    • 1986-1993 US/Cdn: 482 cm (189.8 in)
• Weight: 2,840 lb (1,288.2 kg) (1989 US spec 240, fully fueled, no driver)

src: biser3a.com

Market differences

European/Australian market

• Glass-lens headlamps compliant with international ECE headlighting standards, 1974-1993
• Fender-mounted side turn signal repeaters introduced various years in different European markets per local regulations; worldwide except North America starting in 1984. Australia starting in 1989.
• Daytime running lamps implemented by a second, bright 21W filament in the parking lamp bulbs, introduced mid-1970s in Scandinavia and the UK, and in some other markets outside North America in the early 1980s.
• White parking lamps (with white front turning signals for Italian market until 1977)
• Aspheric sideview mirrors from the 1980 model year (originally not for the DL)
• Diesel engine available (except Australia) from 1979 to 1993.

For 1980, the 240 GT and GLE were dropped from most markets, as well as the 265 GLE. In the UK and Australia the 265 GLE was available until 1985 (now badged "260"). The new GLT model which replaced GT and GLE had the GT's 140 PS (103 kW) fuel injected 2.3-liter engine with manual transmission (sedan only), or the 260's 2.7-liter V6 with 141 PS (104 kW) in station wagons or in automatic-equipped sedans.

North American market

• Exterior lighting system compliant with US federal standards
  • Sealed-beam headlamps 1975-85
  • Speedometer in miles per hour with inner scale in kilometres per hour; odometer in miles (US market)
  • Plastic-lens replaceable-bulb headlamps 1986-1993
  • Headlamp wipers not available; wiper shaft hole below headlamps blanked with rubber plug
  • Front and rear side markers and reflectors incorporated into front parking and rear tail lights
  • Rear fog lamps added in the 1985 model year
  • Daytime Running Lights, using low beams and taillamps introduced in 1990 in Canada.
• In Canada, various market-specific parts such as block heaters were also added at the Volvo Halifax Assembly.

For 1981, the 260 Estate was dropped but the new GLT and GLT Turbo models joined the lineup. The Diesel engine was discontinued in 1984, but was still sold in the 1985 model year with a 1984 VIN and 1985 specs. The Turbo model was discontinued in early 1985.

American-spec headlamp configurations 1974-1993

^{Quad indicates two headlamps per side; all others one headlamp per side}

src: hanabi.autoweek.com

Special editions

• 244 DLS (1977-78): Export model to the former German Democratic Republic with 264 hood and grille from 264DL. Engine B21A. Five different body paintings (solid) available. Total amount exported approx. 1000 units. The cars were mainly sold to residents of East Berlin. Sedans only.

• DLi: MY 1978 limited edition for West Germany. DL trim; equipped with fuel-injected B21E engine (instead of B21A carburetor engine on standard "DL" models). Mostly sedans.
• GLi: MYs 1981 and 1982 specification for the Netherlands. GL trim; equipped with fuel-injected B21E engine (instead of B21A carburetor engine on standard "GL" models there and then). Only estates.
• 264 TE (Top Executive, 1976-81): A limousine version of the 264; many now reside in Germany as they were exported to the former German Democratic Republic for use by the government (which would neither use the small Trabant or Wartburg models nor import West German autos like BMWs and Mercedes-Benzes). As a result, the population nicknamed Wandlitz, the preferred home town of politicians, Volvograd.
• 245 T (Transfer) (1977-early 1980s): An extended wheelbase station wagon designed to have additional rows of seats for use as taxi or rural school bus. These cars had the same wheelbase as the 264 Top Executive.
• 262C/Coupé by Bertone (1978-81): This had custom body work and interior from Bertone. The exterior coachbuilding of these two-door saloons consisted of a chopped roof (2.25in shorter than 242) and a more raked windscreen. The 1980 & 1981 models were badged Coupé instead of 262C. These cars were further characterised by additional Bertone badges on the front wings. Mostly built in left hand drive form, right hand drive vehicles are very rare.

• 242 GT (1978-79, until 1980 in North America): Sport model with tuned sport suspension and a high-compression engine. All US models were Mystic Silver Metallic with black and red racing stripes going from the hood to the side to the trunk. Special black corduroy interior with red stripes. Canadian models were available in black with red pinstripes along the side of the car, in addition to the US model silver.
• GLT Turbo (1981-85): Replaced the GT as the sporty model, equipped with a turbocharged engine, with the 760T intercooler from late 1983, following the sale of the 500 FIA Evolution cars, which were the fits 240T's to be fitted with this uprated intercooler as standard. The two-door model was available 1981-1984; four-door sedans available late 1981-early 1985 and wagons available 1982-early 1985. Came with new black trim as opposed to the popular chrome trim found on the GLs (Grill, door trim, door handles, tail light sills & lens dividers). All came factory stock with 15" Virgo alloy wheels.

• GLT (1980-82): Standing for "Grand Luxe Touring," these models shared the uprated suspension, blacked-out exterior trim, and 15" Virgo alloy wheels of the GLT-Turbo model, but with a naturally aspirated powertrain.
• 244/240 GLE (1981-85) Australian market: Due to the problems with fitting a turbocharger to a RHD vehicle the Turbo model was rebadged a GLE and retained all the backed-out trim and high-end interior fittings of the turbo models but were equipped with the B23E then B230E engines most frequently mated to the BW55 until 1983 then the AW71 for 1984-1985.
• 240T Group A FIA Homologated Turbo (1983): 500 "Evolution" models were built to satisfy production requirements to qualify for the FIA's International Group-A Touring Car racing. The homologation process of the 500 Evolution cars that formed the basis of the famous GpA Volvo 240T race cars [in order to make the car competitive with the Jaguar's XKS and BMW's 635's coupe's, in Group A touring car racing] was controversial, because VMS [Volvo Motor Sport] elected to convert 500 designated car simultaneously on the East and West coast of America, instead of down the assembly lines in Europe, and then once inspected by the FIA in the USA, the assembled 500 Evolution car's [270 on the West coast and 230 on the East coast] would be stripped of the Evolution Kit parts, save only for the uprated intercooler, which was left in place on all 500 cars, and sold across America. For the sake of clarity all 500 of these cars had sunroofs, and none were ever shipped back to VMS to be built up into GpA race cars, only the Swedish built 240 DL body shell's were used because they were built locally and did not have a sunroof option. VMS realised that there was a loop hole in the FIA regulations at that time, which did not require that so called "Evolution" cars had to be sold to the public, but merely built and inspected, prior to being granted Homologation status, hence the controversy that followed the success of the factory car's when they won the European Touring Car Championship in 1985 and would have won again in 1986, but for a fuel irregularity at one race meeting, that ultimately cost Volvo the Championship. This incident also resulted in the Board of Directors withdrawing from factory supported GpA racing programs, much to the disappointment of all the Flying Brick fans around the world.Due to time constraints there was insufficient time to install the Evolution components in the 500 designated 240T cars as they went down the assembly lines in Belgium [save only for the fitting of the European market only Flat-Nose bonnet and matching grill] and so a decision was made to stow each cars Evolution component kit into the trunks of each of the designated car's before they were shipped to the USA, and then retro-fit the component in the USA. 270 of these cars were sent to the Volvo facility, at Long Island, LA and the remaining 230 cars were sent to Volvo East Coast facility at Chesapeake Bay, during a period of only 3 weeks all 500 cars were retro-fitted simultaneously on both the West and East coast with the Evolution Kits. However, immediately following the FIA's random inspection of all the 500 "Evolution" cars, the installation teams, removed all of the Evolution components, with the exception of the uprated Intercooler, which was left in all 500 cars, and sold to the public as the first of the new uprated 240 Turbo Intercooler car's, using the intercooler from the 1983 European 760T's intercooler.All but one of these car's [which was sent back to VMS] were then sold across the USA as the first of 240 Turbo Intercooler cars with the uprated intercoolers. So whilst there were no full Evolution car's sold to the public, the remaining 499 Flat-nosed car's that were sold to the American public were unique, in as much as they were the only Flat -Nosed 240T Intercooler cars ever imported into the USA, and all carried the designation SO2476 on the chassis plate. All subsequent 1983 240 Turbo intercooler car had the projecting, so called Coffin-Nose and grill, but were fitted as standard with the uprated intercooler, which developed more power solely due to the efficiency of the 760's uprated intercooler. Not one of the so-called 500 Evolution cars was ever used by the factory, and or the factory supported GpA 240T race cars, despite claims to the contrary, that 30 were sent back to VMS etc. All of the Factory cars were built up from the 1983 DL body shell's because they had no sunroof and were built in Sweden, so they were readily available and relatively cheap. all were sold to Volvo of North America and approximately 30 were returned to Europe for racing; all of these cars had flat hoods not otherwise seen on North American 240s, as well as numerous and substantial performance and suspension upgrades ranging from larger radiators and intercoolers to water injection and large rear spoilers Source: Goran Sallstrom; Project Engineer for Volvo Motor Sport
• 240 SE (1991): Special alloy wheels, all-black grille and trim. Roof rails on wagon model.
• Police (1981-5): A special edition 240 aimed at the Swedish police, but also made in right-hand-drive form and used by some British constabularies. It was effectively a 240GLT with vinyl, rather than cloth, trim, steel wheels and no sunroof.
• 240 (Super) Polar (1991-1992): European markets only; commonly found in Italy. Mostly with B200F engine.
• 240 Classic (1992-93): European markets from the 1992 model year. For the North American market, only 1,600 were produced in April and May 1993, half wagons and half sedans. European Classics have fully equipped interior with wood dash trim and "Classic" badges on hatch/decklid. In addition to the European equipment, the 1,600 North American Classics have body-matched painted grilles and side mirrors, special 14" alloy wheels, production-number plaque in dash, and special paint colors -- ruby red or metallic dark teal green.
• 240 GL (1992): North American market. Slightly different from the early 1975-1989 GL model, more like the 1993 Classic and the 1991 SE model. Only available in 244 sedan bodystyle.
• 240 Torslanda: These cars can be identified by Torslanda badging, tinted windows, plastic exterior trim, multi-spoke 15" alloy wheels, and full-length body striping above the rocker panels. the only features were heated front seats, power steering and the standard heating systems. The Torslanda was sold outside of Sweden as a limited run special edition to mark the rundown of 240 production. MYs 1992-93 only.
• 240 Family Edition: Entry level cars for the German market from 1990 to 1993. Simplyfied interior with cloth upholstery (instead of tricot plush on "GL"-models). No heated front seats as standard but all equipped with headlamp wipers and fixed black roof rails. No sedans. Shipped with petrol fired B230F engine or D24 Diesel engine. All badged "240".
• 240 Tack: Limited edition in 1992-93 to phase out the 240 series in Japan. Tricot plush trim, five body paintings to choose. Sedans and estates. All units with B230F engine. At the same time a more upmaket limited edition badged "Classic" was offered, too. Same five paintings as "Tack" available, but shipped with black leather upholstey, wood trim on the dash board and "Corona" alloy wheels. Also engine B230F. Sedans and estates as well.

Anniversary special editions

• 244 DL Anniversary (1977): Volvo released this model to celebrate its fiftieth anniversary. Based on the 244DL, the Anniversary Car was finished in Metallic silver with a black and gold band around the waistline. Around 50 were sold in ten different countries, taking the total number produced up to 500.
• 264 Anniversary (1977) Volvo released this model to celebrate its fiftieth anniversary. Based on the 264, the Anniversary Car was finished in Metallic silver with a black and gold band around the waistline. Numbers produced unknown.
• 240 DL Jubileum (1987): Volvo released this model to celebrate its sixtieth anniversary. Like the fiftieth anniversary edition, it was based on the 240 DL series, only this time it was available as both a saloon and an estate.
• 244 Thor (1979-80) Around 300 were produced for the UK market and this spec lay somewhere near the GLE Spec. Noticeable extras fitted as standard were, metallic black paint, premium stereo, auto box, black cloth seats, front electric windows and corona alloy wheels and fuel injection. Noticeable exclusions for a limited edition premium model were, power steering, electric rear windows and air conditioning.

src: globalstories.volvocars.com

Concept models

Volvo produced a prototype for a hatchback version, badged the Volvo 263 GL, but it was not chosen for mass production and is now on display in the Volvo World Museum in Gothenburg, Sweden.

They also produced a prototype called the 242 GTC, which had roof pillars similar to that of a 262 C, and a body design of a 242 GT. It also came with striping on the sides, close to the bottom of the car with the word "TURBO" on it to make it seem lower than it actually was. It was originally planned to have two engine choices, a 16 valve engine (made for racing), and the turbo engine which was under construction.

src: 78.media.tumblr.com

240 in motorsport

Despite its non-sporting image, the Volvo 240 was a successful competitor in touring car racing in the 1980s. In 1983 Volvo produced 505 evolution version of the 240 Turbo with a larger turbocharger and other performance modifications. All of these special cars were exported to the United States with the special equipment kit in the trunk of each car. 270 of these cars were retrofitted with the special equipment at Long Beach LA and further 230 were simultaneously fitted with the same kit on the East coast at the Volvo Penta facility at Chesapeake Bay. All 500, except for one car which was returned to Sweden, were subsequently stripped of their GpA homologation equipment and sold as standard road cars. Contrary to reports at that time this was entirely legal and approved by the FIA which did not require that the cars had to be sold to the public.

The 240T GpA Factory cars proved a successful competitor, and in 1984 won the Zolder round of the European Touring Car Championship. In Group A racing form, the 240T weighed 1,065 kg (2,348 lb), and its turbocharged 2.1-litre engine produced approximately 350 bhp (261 kW; 355 PS). Although it was a boxy looking car and lacked the agility of some of its competitors, it was fast in a straight line (approximately 260 km/h (162 mph) on faster circuits such as Monza, Hockenheim and Bathurst) and proved to be reliable. Volvo Motor Sport, VMS, did not run the cars directly, instead contracting the services of established teams to prepare and manage them, on VMS behalf, with technical assistance from VMS.

The Eggenberger Motorsport team was the most successful of these. Late in the 1984 European Touring Car Championship, Swedish team Sportpromotion won the EG Trophy race at Zolder circuit and followed that with second in the 500 km del Mugello. In 1985, Volvo signed Swiss engine guru Reudi Eggenberger to run its works team. Eggenberger Motorsport, with team drivers Gianfranco Brancatelli and Thomas Lindström, won the 1985 ETCC outright, seeing off challenges from BMW (Schnitzer), and defending ETCC champions TWR who were running the V8 engined Rover Vitesse rather than the V12 Jaguar XJS that had dominated 1984 after Jaguar had decided to concentrate on Sports Car racing.

Eggengerger moved to race Ford Sierras in 1986 and Volvo contraced Belgian based team RAS Sport to be its Factory "Works" team in the ETCC, with defending champion Lindström being joined by ex-Formula One and Grand Prix motorcycle racer Johnny Cecotto, as well as Ulf Granberg and Anders Olofsson in the second car. The team was competitive in 1986, taking wins at Hockenheim, Anderstorp, Brno, Österreichring and Zolder. Unfortunately however, the wins at Anderstorp and the Österreichring were taken away from the team due to illegal fuel. The disqualifications would see Lindström unable to defend his title, and Volvo AB quit GpA racing.

Around the world, other teams were also running the Volvo 240T with a fair degree of success. New Zealand business man and racer Mark Petch had purchased an ex GTM Team car directly from VMS 240T and with drivers Robbie Francevic and Michel Delcourt won the Wellington 500 street race in New Zealand in January 1985 after starting from the rear of the grid due to the car not arriving in time to qualify. MPM, Mark Petch Motorsport took the car to Australia with financial assistance from Volvo Australia. Francevic then went on to finish 5th in the 1985 Australian Touring Car Championship (the first ATCC to be run under Group A rules), taking out right wins at Symmons Plains and Oran Park. Thomas Lindström joined Francevic to drive in the 1986 Wellington 500 and brought with him from Europe the latest engine and suspension upgrades for the car. Petch with the help of Bob Atkins, Head of The Australian Volvo dealer Council, formed the AVDT, Australian Volvo Dealer Team who purchased Petch's car and spares immediately following MPM's second back to back win at he opening two round of the 1986 ATCC. The Volvo Dealer Team expanded to two cars, for the 4th round of the ATCC at Adelaide with the new car RHD car, ex RAS, being for dual Australian Single Seater Drivers' Champion John Bowe who had driven with Francevic at the 1985 Bathurst 1000. Francevic won the 1986 Australian Touring Car Championship the first and only time that the title had been won by a Volvo driver and the first time since its inception in 1960 that it had been won with a car powered by a turbcharged engine. Volvo GpA car's also won the Guia Race in Macau consecutively in 1985 and 1986.

Volvo withdrew from the sport at the end of the 1986 season, principally because of the RAS team being found guilty of using non approved race fuel, but also because the 240T had achieved what it set out to do in 1983. Volvo did not return to touring car racing until the advent of Super Touring racing in the early 1990s, with the 850 model.

The 240 also enjoyed some success in other branches of motorsport. Although Volvo had pulled out of rallying in the early 1970s, the 240 Turbo did see action as a Group A rally car in the mid-1980s, but without works backing it met with only limited success. The normally aspirated version remained eligible for international competition until 1996, and to this day the 240 remains a popular clubman's rally car in Scandinavia. Its popularity has in recent years been boosted with the establishment of the Volvo Original Cup, or VOC. This is a championship for amateur rally drivers using Volvo 240s, 740s and 940s. In the interests of cost control, only very limited modifications are allowed to the cars. The series attracts large numbers of competitors, attracted by its low cost and by the Volvo's rear-drive handling and reliability.

Because it is cheap and robust, the 240 has also become very common in folkrace competitions. In the UK the 240 is popular for banger racing, due to its strength. The Volvo 240 is now a common choice alongside Ford Granadas and Jaguars for using at unlimited banger meetings. In the United States, 240s regularly appear in low-budget endurance racing series such as 24 Hours of LeMons, where the 240 reliability, durability, and easy parts availability are much appreciated.

src: carphotos.cardomain.com

Notes

src: momentcar.com

References

Source of the article : Wikipedia